Jiangsu Karen Aluminum Co.,Ltd
Jiangsu Karen Aluminum Co.,Ltd Quality Product for Quality Life
Add to Cart
Aerofoil Anodized Aluminum Sun Louver Blade / Oval Shaped Aluminum Extrusion Section
Product Info:
1. Name: aluminium sun blade
2. Size:240*50 MM
3. Weight:4.9 kg/m
4. Material: 6005, 6063, 6061, etc.
5. Surface Treatment: silver anodized
6. Coating Thickness: ≥15 um
7. Length: as customer's requirement
Applications:
| 1. for Government building |
| 2. for Air port, Hotel |
| 3. for Exhibition hall |
| 4. for Commercial building |
| 5. for Large-scale glass curtain wall |
| 6. for Glass roof as awning |
Advantages of Aluminum Sun Blade:
1. Protect from the strong sun light
2. Heat insulation
3. Easy installation: horizontal / vertical
4. Low maintenance cost
5. Long life
6. Up grade the building
7. Energy-saving
8. Light weight but strong enough
| Aluminium Alloy Chemical Composition | ||||
| Alloy | 6063 (%) | 6063A (%) | 6061 (%) | 6082 (%) |
| Si | 0.2~0.60 | 0.3~0.60 | 0.4~0.80 | 0.7~1.30 |
| Fe | 0.35 | 0.15~0.35 | 0.70 | 0.50 |
| Cu | 0.10 | 0.10 | 0.15~0.40 | 0.10 |
| Mn | 0.10 | 0.15 | 0.15 | 0.40~1.0 |
| Mg | 0.45~0.90 | 0.60~0.90 | 0.80~1.20 | 0.6~1.20 |
| Cr | 0.10 | 0.05 | 0.04~0.35 | 0.25 |
| Zn | 0.10 | 0.15 | 0.25 | 0.20 |
| Ti | 0.10 | 0.10 | 0.15 | 0.10 |
| Other (each) | 0.05 | 0.05 | 0.05 | 0.50 |
| Other (total) | 0.15 | 0.15 | 0.15 | 0.15 |
| Al | Remainder | Remainder | Remainder | Remainder |
Factory Introduction:
Jiangsu Karen Aluminum Co.,Ltd is a large-scale professional manufacturing company.We focus on solar panel frame,aluminium beams,aluminium louvers,aluminium frame for HVAC systems,industrial aluminum profiles since 1985.
We are Gold Supplier for TOP 500 Enterprise.Some as below.
- TRINA SOLAR / RENESOLA / SOLARTRON PUBLIC / SHARP (Solar Industry)
- OTIS / Thyssenkrupp / Schindler Group / Westinghouse(Elevator&Escalator Parts)
- Carrier / Climaveneta / Mammoth Inc.(HVAC Profile)
More Products:
FAQ to save your precious time:
Question 1 :What is your normal terms of payment?
We always trade with you by T/T.But we also accept the L/C as you require.
Question 2 :Can you supply OEM services?
We offer OEM services for 20 years.
Question 3 :How many days for opening the mould?
Normally about 10 days.According to the difficulty of your drawing.