Jiangsu Karen Aluminum Co.,Ltd
Jiangsu Karen Aluminum Co.,Ltd Quality Product for Quality Life
Add to Cart
Mill Finish Round Aluminum Multihollow Extrusion Profiles for Boats, 6061 and 6005 Aluminum Alloy
Applications:
Aluminum heat sink is widely used on Machines , cars , lighter ...
Specifications:
1) Chemical composition
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Impurity | Al |
| 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45-0.9 | 0.1 | 0.1 | 0.1 | 0.15 | Rest |
| 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | 0.25 | 0.15 | 0.15 | Rest |
| 6060 | 0.3-0.6 | 0.1-0.3 | 0.1 | 0.1 | 0.35-0.6 | - | 0.15 | 0.1 | 0.15 | Rest |
| 6005 | 0.6-0.9 | 0.35 | 0.1 | 0.1 | 0.40-0.6 | 0.1 | 0.1 | 0.1 | 0.15 | Rest |
2) Mechanical property
| Alloy | Temper | Tensile strength | Yield strength | Elongation |
| 6063 | T5 | ≥ 160Mpa | ≥ 110Mpa | ≥ 8% |
| T6 | ≥ 205Mpa | ≥ 180Mpa | ≥ 8% | |
| 6061 | T6 | ≥ 265Mpa | ≥ 245Mpa | ≥ 8% |
Section shape:
I, U, T, C, Z, L, H, square, round, flat, hollow, t-slot, and other complicated shapes by custom design.
Surface treatment:
Mill finish/ Anodizing/ Sand blasting / Powder Coating / Electrophoresis / PVDF Coating / Wood grain.
Item Detail:
FAQ:
Question1: What’s the thickness for anodizing? Can you do 15um?
A: Our normal thickness is about 10 um. Yes, we can do 15um and above.
Question2: What color you can do for powder coating? What about the thickness?
A: We can do any color for powder coat as long as you can provide the color
sample. Our normally powder coating thickness is 60-80um.
Question3: What certification do you have? What’s your standard?
A: We have ISO / TS 16949:2009, SGS & ROHS certification.
Our standard is DIN, AAMA, AS/NZS, China GB.
Question4: What’s the payment terms?
A: Usually by T/T, 30% deposit and the balance paid before shipment.
More Products: